Westec 2023

It's not too late to register for WESTEC 2023!

Are you looking to solve the challenges you face in your day-to-day manufacturing processes

Visit us at booth #2016 and get hands-on demonstrations of our Universal Metrology Automation solutions—we have hardware and software solutions that can help you optimize your process and increase efficiency

See you there!

Click here for register

Automate 2023

We are excited to announce that we'll be showcasing our UMA Smart Station at Automate 2023, the largest and most inspiring showcase of automation in North America.

The UMA Smart Station is a turn-key inspection solution for the factory floor. It is used for mobile inspection in factories looking to remove the bottleneck of quality control in production processes; made to run inspections with just a single click, the UMA Smart Station can support a variety of 3D scanners and 2D cameras supported by an Aubo collaborative robot.

Automotive Expo 2023

The event is dedicated to showcasing the latest technologies and trends, this is in the focus of the exhibition and the related conferences. AUTOMOTIVE HUNGARY is for bringing together domestic and international suppliers and service providers of the automotive industry at all levels. Meetings and collaborations may have never been as important in the industry as they are in today’s structural transformation.

For more information, click here

Supplier Quality and Automation Workshop

We're excited to announce our upcoming event, "Supplier Quality and Automation Workshop"

In this event, we will highlight the latest technologies of Inspection solutions for Inline, Near-line and off-line inspection. Our focus will be Automation to ensure product conformance, reduce warranty claims and product recalls and improve consistency and throughput.

We will feature live demonstrations of a variety of 3D scanners and 2D cameras (vision systems), along with COBOTS that can quickly inspect products through the manufacturing process. We will also demonstrate contact inspection and non-contact inspection solutions and where each of them fits.

In addition, a technical resource from PolyWorks will attend to host a breakout session on Data Loop.

Fill out my online form.

Productivity Masterclass

Join Universal Robots for an introduction to the business case for cobot automation, this November 29th and December 1st in the CA area

Metal Madrid 2022

If you're in Madrid, Spain, don't miss the live demos that our partners at AsorCAD Engineering will run using the UMA Smart Station

St. Jude Run/Walk

This September, at 3D Infotech, we'll celebrate Childhood Cancer Awareness Month as a nationwide community

Robert E. Morris Open House

Robert E. Morris company gathered 10 UniversalRobots' partners to demonstrate their cobot automation expertise at an open house event

Webinar: 3D Scanning Automation

Don't miss this webinar where you will discover the benefits of working with a Robotic Inspection System paired with a Structured Light Scanner!

RAPID + TCT 2022

Join us at RAPID + TCT 2022, the largest additive manufacturing event to attend a discussion panel with Rohit Khanna and professionals of the industry!

Webinar: Robots in Metrology

We would like to invite you to join us for Robots in Metrology with Quality Magazine and Universal Robots on May 19, 2022 at 2:00pm ET.

Automate 2022

Join 3D Infotech and Universal Robots at Automate 2022 in Detroit, Michigan June 6-9.

SPIE Photonics West

Join 3D Infotech and Universal Robots at SPIE Photonics West, in San Francisco, CA. Watch and learn how the UMA Smart Desktop can remove bottlenecks in your industrial applications.

Robotic Dispensing and 3D Inspection of Sealant and Adhesives

Using collaborative robots to apply sealants and adhesives is gaining terrain in the automotive industry. Don't miss this webinar to learn how to improve the workflow with 3D sensors and a rotary table.

Webinar: Advanced Quality Inspection with UR

Don’t miss this webinar to learn three different techniques of automated quality inspection with Universal Robots collaborative robots

Applied Automation - Virtual Event

A virtual conference with industry speakers, solutions demos and presentations, and 23 exhibitor booths

PolyWorks Conference Live 2021

The online PolyWorks® Conference Live will show how the digital transformation of your 3D measurement processes. Free event hosted by InnovMetric this April 28-29

Webinar: 3D Scanning vs. Traditional: Comparing CMM Accuracy in Automotive

Don’t miss this webinar to learn the many differences between robot-mounted 3D scanning CMMs and traditional CMMs in automotive industry applications.

WEBINAR - CMM Programming made Easy

Don’t miss this webinar to learn from the best tips and tricks to remove the bottleneck when programming a CMM and 3D scanning, using PolyWorks Inspector!

The Cobot Expo 2.0

3D Infotech will be present at the Cobot Expo 2.0, the place where you can see the latest in collaborative robots and automation.

WEBINAR - Implementing Automated Quality Control and Machine Vision

Our partner Owens Design is hosting a very intesting webinar about how to run Automated Quality Control with Machine Vision in an easy way, don't miss this oportunity!

WEBINAR - CMM Tending

Join us this October 8th, for this live webinar and explore automated way to load/unload parts from CMM to save time & cost and improve your inspection process.

PolyWorks Conference Live 2020

Virtual PolyWorks Conference 2020 by InnovMetric is coming soon! Now the conference goes virtual with a multi-date world wide event. 🙌

WEBINAR - Deep Learning Machine Vision

Join us this September 23rd and October 5th, 2020 for this live webinar and discover how Deep Learning Machine Vision systems can fix bottlenecks in many applications!

Automated Inspection Webinar

Join us for a live webinar and discover a new way to improve your inspection process with UMA

FARO Webinar

Join us for a live webinar and discover how to get the maximum potential of FARO with PolyWorks Integration

Cancelled Event: PolyWorks Conference USA|2020

Innovmetric, developer of PolyWorks Metrology Suite, announced that due to rapidly escalating health concerns relating to the spread of the coronavirus disease (COVID-19), their event PolyWorks Conference 2020 has been canceled.

Canceled Event: PolyWorks & Coffee

Due to rapidly escalating health concerns relating to the spread of the coronavirus disease (COVID-19), the PolyWorks & Coffee 2020 has been canceled.

RAPID + TCT 2020

RAPID + TCT is North America's largest and most important additive manufacturing event.

ATX West 2020

Anaheim, CA. - ATX West 2020 will feature the latest technologies and innovations spanning medtech, design engineering, robotics, plastics, packaging, and more.

Scan & Coffee 2020

Join 3D Infotech in Irvine, CA for our Scan & Coffee on January 30, 2020!.

Scan & Coffee 2019

Join 3D Infotech in Irvine, CA for our Scan & Coffee on December 5, 2019 from 7:00am to 11:00am.

Universal Metrology Workshop MX

3D Infotech held a Workshop at Universal Robots, México, click here to see the highlights.

Titanium USA 2019

3D Infotech will be present at TITANIUM 2019 showing a new versión of Streamline, Spotlight AR++ and our UMA Solutions

Quality Show 2019

The Quality Show, is a tradeshow dedicated to connecting quality manufacturing professionals with process improvement vendors.

3D Infotech at Midexacto Open House

3D Infotech will be present with at Midexacto's Open House in Puebla and Tijuana, Mexico on May 16-17, and May 29-30 2019 from 12:00 to 20:00.

PolyWorks Conference CHINA|2019

Gain new PolyWorks skills, hear new ideas, share with like-minded people, and grow your passion for 3D metrology!

PolyWorks Conference MEXICO|2019

Gain new PolyWorks skills, hear new ideas, share with like-minded people, and grow your passion for 3D metrology!

Plastimagen 2019

PLASTIMAGEN is known as the most important event in the plastic industry around Latin America.

Westec 2019

WESTEC 2019, the leading California manufacturing trade show, will be held September 24 – 26 in the Long Beach Convention Center.

CastExpo & Metalcasting Congress 2019

CastExpo 2019 is around the corner. This year 3D Infotech will attend the show to give a talk about automated inspection

Polyworks Conference USA|2019

Gain new PolyWorks skills, hear new ideas, share with like-minded people, and grow your passion for 3D metrology!

Automate 2019

3D Infotech will be showing UMA Smart Station with Leica T-Scan & Spotlight AR++ at Automate 2019.

3D Infotech Open House

Join 3D Infotech in Irvine, CA for our Open House on March 5-6, 2019 from 9:00am to 4:00pm.

RAPID + TCT 2019

RAPID + TCT is North America's preeminent event for discovery, innovation, and networking in 3D manufacturing.

Expo Manufactura 2019, Mexico

Expo Manufactura has been the most important manufacturing event in Mexico for 29 years. This year, 3D Infotech will be showing their innovations in automation of the inspection processes.

Titanium USA 2018

3D Infotech will be present at TITANIUM 2018 showing the new versión of Streamline and our brand new product called Spotligth AR++

IMTS 2018: International Manufacturing Technology Show

IMTS 2018: International Manufacturing Technology Show

IMTS 2018: International Manufacturing Technology Show For 90 years, IMTS has been the premier manufacturing technology show in the Northern Hemisphere.

PolyWorks User Meeting West Coast 2018 Banner

PolyWorks User Meeting West Coast 2018

PolyWorks User Meeting West Coast 2018 is the event where PolyWorks software users can witness the latest features of the new version and Universal Metrology Automation solutions.

PolyWorks Conference 2018 Banner

PolyWorks Conference 2018

You may have heard about the smart factory of the future: smart manufacturing with connected technologies. But what does that mean for the future of metrology?

Control International 2018 Stuttgart Banner

Control International 2018 Stuttgart

The Control international trade fair for quality assurance, which will be held at the Stuttgart Exhibition Centre from 24 to 27 April 2018, provides suppliers and users

ATX West 2018 Banner

ATX West Expo 2018

Anaheim, CA. - ATX West Expo 2018 connects you with serious automation and robotics professionals for three days of design and manufacturing immersion you can't find anywhere else.

SolidWorks World 2018 Banner

Join Us at SolidWorks World 2018

SOLIDWORKS World 2018 Learn, Play, Work, Connect, Ignite. Over the course of three full days, learn from more than 5,000 members of the SOLIDWORKS community and more than 200 breakout sessions. Gain insight into specific topics or solutions ranging from design to manufacturing, 3D CAD and simulation, electrical design and schematics, communications, collaboration, and data management.

MFG Day 2017 Banner

MFG Day 2017

ACE will be hosting MFGDAY for the fifth time this year, presenting "The Manufacturing Process from Conceptual Design to Final Assembly". Eighteen work centers will showcase traditional, innovative and futuristic, state-of-the-art processes and technologies

bottom-top

Image
Image

Schedule a Demo

+1 (949) 988-0200
or

bottom-1_Contact

Image

3D Infotech, Inc

North America:
7 Hubble Irvine, CA 92618
(800) 276-1372
usa@3dinfotech.com

Latin America:
Avenida Corregidora Norte,
Corregidora No. 1116, 76140
Santiago de Querétaro, Qro
latam@3dinfotech.com

Europe and Middle East:
Méhész köz 5. Gödöllő 2100
emea@3dinfotech.com

Asia Pacific:
Room105&107, Building D, No. 2888,
Wuzhong Avenue,
Suzhou, Jiangsu
apac@3dinfotech.com

bottom-2_socialmedia

Image

bottom-3_Industries